Digital Transmission System - DCS-FCS


Industrial automation is the intelligent control of an industrial planned process to produce a particular product. In industrial automation, all functions are analyzed by processors and the required instructions are issued to keep the balance of process. The task of sensors is to monitor the system and the function of actuators is to issue the necessary commands in the process. In distributed control system (DCS), controllers and processors are installed in different locations and monitored from a central processor, while FCS receives and sends information through the industrial bus; such information is analyzed and monitored by the central analyzer. Houpiran is committed to providing cost-effective designs to beneficiaries in the industrial sector.

Consulting, Feasibility, and Simulation

Parking crisis has been afflicted many of the big cities and has always been a source of dissatisfaction with urban services in large places. Intelligent parking systems include an automated system for facilitating traffic and signs for choosing a parking lot, facilitating payment of parking fees, and ultimately a guiding system to get out of the parking lot. Smart parking systems have different types and use various technologies that can be designed according to customer requirements. With an accurate understanding of the types and benefits of each one, Houpiran tries always to offer a cost-effective solution for employers.

Supply of Equipment

Selection of the best products from all over the world in order to meet the needs of employers, provide cost-effective equipment with accurate knowledge of its features and capabilities, guarantee the quality and after-sale services of products for industries and mines, transportation, military and police, urban management, real estate and business, recreational and tourist centers, and maintaining structural integrity from Asian, European and American countries in the shortest possible time, as well as the use of domestic industries and the observance of the development of new technologies in these products and quality assurance to satisfy the employers' objectives are the services provided by Houpiran.

Installation, Implementation, and Training

Houpiran services include the implementation of all engineering operations with an emphasis on compliance with international standards, use of online software(ERP & CRM) to provide the employer with the reports on the performance the contractor, observance of environmental protection and HSE rules, the development of documentation during the operation, training during the operation, temporary and final delivery of the works, all to the approval of the employer and observance of all site rules to reduce possible damages, guarantee the quality of service and performance of the system after the final delivery of systems up to 10 years, provide parking management models.

News Distributed Control System

Has no content to show!
Industrial automation is responsible to fulfill the main task of producing a process. The production process in factories, oil and gas and petrochemical industries, production and transmission lines, and hundreds of other processes is always monitored and controlled by the control and instrumentation systems. In the absence of such technology, thousands of people work on the production of certain products at a very low speed, high errors, and financial risks. DCS operate based on the selection of controllers, processors, input and output modules, actuators and mechanical equipment. The choice of each type of equipment depends on the exact mathematical calculations of the advanced control circles and the extraction of the requirements. In the meantime, the programming of each controller processor is important on the basis of various required functions and control parameters. In the Fieldbus Control system (FCS), instead of controlling vastly by processors, the information is collected in the field layer by industrial bus and eventually transmitted to the central processor. After analyzing and processing with functions programming and extraction of various parameters, control commands are sent to the field layer on the industrial bus. Choosing all of the above, including different equipment, controllers, modules, processors, and field-layer equipment, is very important for the correct performance of a process.
Has no content to show
Has no content to show
Has no content to show
Has no content to show
Has no content to show
Has no content to show